Connectors

Trabajando con Conectores — Aspose.Slides FOSS para Python

Los conectores son formas que enlazan visualmente dos otras formas con una línea. Aspose.Slides FOSS para Python admite conectores doblados, rectos y curvos. Los puntos de conexión en una forma se identifican por entero índices de sitio de conexión.

Índices de Sitios de Conexión

Cada forma expone cuatro sitios de conexión estándar:

Índice	Lado
`0`	Superior
`1`	Izquierda
`2`	Inferior
`3`	Derecha

Añadiendo un Conector Doblado Entre Dos Formas

from aspose.slides_foss import ShapeType
import aspose.slides_foss as slides
from aspose.slides_foss.export import SaveFormat

with slides.Presentation() as prs:
    slide = prs.slides[0]

    # Create two shapes to connect
    box1 = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, 50, 150, 150, 60)
    box1.add_text_frame("Start")

    box2 = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, 400, 150, 150, 60)
    box2.add_text_frame("End")

    # Add a bent connector (position/size are ignored once connected)
    conn = slide.shapes.add_connector(ShapeType.BENT_CONNECTOR3, 0, 0, 10, 10)

    # Connect right side of box1 → left side of box2
    conn.start_shape_connected_to = box1
    conn.start_shape_connection_site_index = 3   # right
    conn.end_shape_connected_to = box2
    conn.end_shape_connection_site_index = 1     # left

    prs.save("connector.pptx", SaveFormat.PPTX)

Tipos de Forma de Conector

ShapeType	Descripción
`ShapeType.BENT_CONNECTOR3`	Dos giros de 90° (los más comunes para diagramas estilo diagrama de flujo)
`ShapeType.BENT_CONNECTOR2`	Un giro de 90°
`ShapeType.BENT_CONNECTOR4`	Tres curvas de 90°
`ShapeType.STRAIGHT_CONNECTOR1`	Línea recta directa
`ShapeType.CURVED_CONNECTOR2`	Curva suave única
`ShapeType.CURVED_CONNECTOR3`	Curva de doble doblez

Conexión de Arriba a Abajo

from aspose.slides_foss import ShapeType
import aspose.slides_foss as slides
from aspose.slides_foss.export import SaveFormat

with slides.Presentation() as prs:
    slide = prs.slides[0]

    top = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, 250, 80, 200, 60)
    top.add_text_frame("Decision")

    bottom = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, 250, 300, 200, 60)
    bottom.add_text_frame("Action")

    conn = slide.shapes.add_connector(ShapeType.BENT_CONNECTOR3, 0, 0, 10, 10)
    conn.start_shape_connected_to = top
    conn.start_shape_connection_site_index = 2    # bottom of top box
    conn.end_shape_connected_to = bottom
    conn.end_shape_connection_site_index = 0      # top of bottom box

    prs.save("vertical-connector.pptx", SaveFormat.PPTX)

Diagrama de Flujo con Múltiples Conectores

from aspose.slides_foss import ShapeType
import aspose.slides_foss as slides
from aspose.slides_foss.export import SaveFormat


def add_box(slide, text, x, y, w=160, h=50):
    s = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, x, y, w, h)
    s.add_text_frame(text)
    return s


def connect(slide, s1, site1, s2, site2):
    conn = slide.shapes.add_connector(ShapeType.BENT_CONNECTOR3, 0, 0, 10, 10)
    conn.start_shape_connected_to = s1
    conn.start_shape_connection_site_index = site1
    conn.end_shape_connected_to = s2
    conn.end_shape_connection_site_index = site2
    return conn


with slides.Presentation() as prs:
    slide = prs.slides[0]

    start = add_box(slide, "Start", 260, 60)
    process = add_box(slide, "Process Data", 260, 180)
    end = add_box(slide, "End", 260, 300)

    connect(slide, start, 2, process, 0)    # start → process (bottom to top)
    connect(slide, process, 2, end, 0)      # process → end (bottom to top)

    prs.save("flowchart.pptx", SaveFormat.PPTX)

Formato de un Conector

Los conectores soportan lo mismo line_format propiedades que otras formas:

from aspose.slides_foss import ShapeType, LineDashStyle
from aspose.slides_foss.drawing import Color
import aspose.slides_foss as slides
from aspose.slides_foss.export import SaveFormat

with slides.Presentation() as prs:
    slide = prs.slides[0]
    box1 = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, 50, 150, 150, 60)
    box2 = slide.shapes.add_auto_shape(ShapeType.RECTANGLE, 400, 150, 150, 60)

    conn = slide.shapes.add_connector(ShapeType.BENT_CONNECTOR3, 0, 0, 10, 10)
    conn.start_shape_connected_to = box1
    conn.start_shape_connection_site_index = 3
    conn.end_shape_connected_to = box2
    conn.end_shape_connection_site_index = 1

    # Style the connector line
    conn.line_format.width = 2.5
    conn.line_format.dash_style = LineDashStyle.DASH
    conn.line_format.fill_format.solid_fill_color.color = Color.dark_blue

    prs.save("styled-connector.pptx", SaveFormat.PPTX)